本產品按GB12706《額定電壓35KV銅芯、鋁芯塑料絕緣電力電纜》標準生產,同時還可根據用戶需要按國際電工委員會推薦標準IEC、英國標準、德國標準及美國標準生產。The product is manufactured according to the standard of GB12706、IEC.BS,DIN and ICEA upon request.
簡介:
XLPE Insulated Power Cable
產品標準 standard
適用范圍
適用范圍 Applications
本產品適用于工頻額定電壓64/1KV及以下配電網或工業裝置中固定敷設之用。
The product is suitable for use in power distribution lines or fixed installations with rated power- frequency voltage up to and including 0.6/1Kv.
使用特性 Operating characteridtles
·工頻額定UO/U為0.6/1KV。
Rated power –frequency voltage UO/U為0.6/1KV。
電纜導體允許長期最高工作溫度為90℃。
Max.permissible continuous operating temperature of conductor:90℃.
短路時(最長持續時間不超過5s)電纜導體的最高溫度不超過250℃。
Max.short –circuit temperature of conductor shall not exceed 250℃(5s maximum duration ).
電纜敷設時環境溫度應不低于0℃。
The ambient temperature under installation should not below 0℃.
電纜彎曲半徑:不小于電纜外徑的15倍。
The bending radius should not less than 15 times of cable diameter.
地址:浙江省臺州市海豐路2618號1-3幢
生產許可證號:(浙)XK06-001-00249